View LA6533_397505.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number:ENN3266
Monolithic Linear IC
LA6533
2-Channel BTL-Use or 4-Channel Driver
Overview
The LA6533 is a 2-channel BTL-use driver designed for compact disc pickup actuation or a 4-channel driver for general-purpose applications.
Package Dimensions
unit:mm 3054A-DIP16F
[LA6533]
16 9
0.51min
* High output current (IO max=0.5A). * Wide operating voltage range (4 to 15V). * Low input bias current. * On-chip thermal shutdown. * Output of amps 1 to 4 at muting-ON. mode:OFF.
0.81
7.62 6.45
Functions and Features
1 19.4 8
2.54
0.5
1.3
Specifications
Maximum Ratings at Ta = 25C
Parameter Maximum supply voltage Allowable power dissipation Maximum input voltage Muting pin current Maximum output current Operating temperature Storage temperature Symbol VCC max Pd max VINB max IM max IO max Topr Tstg Buffer amplifier Conditions
3.5
4.26max
3.46
SANYO : DIP16F
Ratings 16 1.9 15 1 0.7 -20 to +75 -55 to +150
0.4
Unit V W V mA A C C
Operating Conditions at Ta = 25C
Parameter Maximum supply voltage Load resistance Symbol VCC RL Pins 3 to 6, 11 to 14 Conditions Ratings 5 8 Unit V
Operating Characteristics at Ta = 25C, VCC=5.0V
Parameter No-loaded current drain 1 No-loaded current drain 2 No-loaded current drain 3 No-loaded current drain 4 Symbol ICC1 ICC2 ICC3 ICC4 Mute OFF, Note1 Mute ON Mute OFF, Note2 Mute ON Conditions Ratings min 5 3 10 4 typ 10 7 20 8 max 20 15 30 16 Unit mA mA mA mA
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
40500TN (KOTO)/N019TA, TS No.3266-1/4
LA6533
Continued from preceding page.
Parameter Output offset voltage 1 Output offset voltage 2 Buffer input-output voltage difference Buffer input voltage range Amp input voltage range Input bias current Output voltage Bridge output voltage difference Closed-circuit voltage gain Muting pin on-state voltage Muting pin flow-in current Symbol VOF1 VOF2 VBIO VBICM VICM IB VO VOD VG VM IM RL=8.0 8 load between pins 3 and 6, 11 and 14. 2.8 1.8 Out 1 and Out 2 Out 3 and Out 4 Buffer amplifier Buffer amplifier Conditions Ratings min -50 -50 -30 1.5 1.0 50 3.3 2.2 6.0 0.7 3.0 typ max +50 +50 +30
VCC-1.5 VCC-1.5
Unit mV mV mV V V nA V V dB V A
Note 1) Pins 2, 7, 10, 15 : GND Note 2) Pins 2, 7, 10, 15 : 1/2VCC
Equivalent Circuit Block Diagram
Sample Printed Circuit Pattern
No.3266-2/4
LA6533
Sample Application Circuit
No.3266-3/4
LA6533
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of April, 2000. Specifications and information herein are subject to change without notice.
PS No.3266-4/4

▲Up To Search▲

Price & Availability of LA6533

	To Download LA6533 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .